Number of views:
A Jacketed Melt Four-way Valve
Number of views:
Product serial number
Return to list
Jacketed high temperature melt four-way valve is the combination valve. Made up by three jacketed globe valve. Used to change the process flow of the medium control the confluence of multi-channel medium or shunt way. Material from imported into three export discharging, three export can be two on one off, also can open all at the same time. Operation method according to the requirement of the production process.
Jacketed high temperature melt four-way valve design can be used according to the customer requirements in rotary four- way valve, the valve stem is open or close to rotary reciprocating motion) and ordinary jacketed four-way valve, the valve stem is open or close to linear reciprocating motion) two, as shown in the diagram.
|Operation method||Manual, electric, hydraulic||
Special specifications, materials, and media flow are customized according to customer requirements. No dead ends, high at all
The vacuum state is also applicable. Mode of operation: electric, wheel drive.
|Inspection and acceptance||PAI STD 598|
|Inner tube material||304/316 / 304L / 316L|
|Applicable medium jacket||Heat medium HTM|
|Applicable medium inner tube||Ester, prepolymer, melt|
|Design temperature jacket||≤330 ℃|
|Design temperature inner tube||≤360 ℃|
|Valve diameter||DN25-DN400 2 "-16"|
|Pressure level jacket||0.6-2.5MPA 150LB|
|Pressure level inner tube||0.6-42MPA 125LB- 2500LB|
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table