Hello, welcome to Jiangsu Main Machinery Technology Co., Ltd.!
Telephone:0510-86017899 Email:huangqindong@jszhjx.cn
A brief introduction to the internal structure of the Melt filter
Release Date:
2020-12-15
The Melt filter features a vertical structure with slurry entering from the bottom and exiting from the top of the vertically placed cylindrical body, offering the advantage of fast slurry flow. The cylindrical body uses a petal-shaped filling structure, leaving no residual space or dead angles within the filter chamber. The Melt filter's pleated filter element is a precision filtration device using polypropylene spray coating film, nylon polytetrafluoroethylene microporous filter membrane, etc., as filter materials. It is characterized by its small size, large filtration area, and high precision.
Melt filter The melt-blown filter element is made of polypropylene ultrafine fibers, formed by thermal bonding and entanglement. The fibers randomly form a three-dimensional microporous structure in space, with the size of the pores distributed in a gradient along the flow direction of the filtrate. Melt filter Combining fine filtration and microfiltration, the accuracy range of the element is 0.5 to 100m , and its flux exceeds that of peak indoor filter elements of the same accuracy by 1.5 times, blocking impurities of different particle sizes to meet the needs of different engineering equipment.
Melt filter It is improved by finely winding textile fiber yarns with good filtration performance onto a porous skeleton. The materials include polypropylene fibers, acrylic fibers, absorbent cotton fibers, etc., better removing solid and particulate impurities suspended in different liquids, and having a significant cleaning effect on high contents of different liquids. Melt filter The slurry is fed from the bottom of the vertically placed cylindrical body and discharged from the top. The vertical structure has the advantage of fast slurry flow. The cylinder uses a petal-shaped filling structure, with no remaining space in the filter chamber and no filtration dead angle. Melt filter The folded filter element is a fine filtration device using polypropylene spray coating membrane, nylon polytetrafluoroethylene microporous filter membrane, etc., as filter materials. It features small volume, large filtration area, and high accuracy, with filtration accuracy in 0.1-60 range.
Melt filter The sealing of the end caps and the overall structure of the filter element are connected by thermal bonding. The shrinkable activated carbon filter element uses coal-based activated carbon and coconut shell activated carbon with high adsorption capacity as filter materials, and is sintered and formed together with a binder. The compact activated carbon filter element is covered with a layer of non-woven fabric with a filtering function both inside and outside. Both ends of the carbon core are equipped with soft rubber gaskets to install the carbon core onto the filter element, so the carbon core itself will not drop carbon powder, and the air tightness is good.
Previous page： The working principle of a fully automatic filter
Next page： Two important notes on using a water filter
→ Related News
Jiangsu Main Machinery Technology Co., Ltd.
Service Hotline:
18815025787 15961606506 (Mr. Huang)
Company Address:
No. 68, Wanquan Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province
