Fully automatic filter manufacturers will discuss the application characteristics and types of self-cleaning filters below

　　Manufacturer of fully automatic filters. The following is a discussion of the application characteristics and types of self-cleaning filters.

　　 Fully automatic filter Manufacturer: Application characteristics of self-cleaning filters

　　Self-cleaning filters are widely used in the water treatment industry. Their simple design and good performance enable wastewater to achieve good filtration effects. The main components include: motor, electrical cabinet, control piping, main components, filter element components, 316L stainless steel brush, frame components, transmission shaft, inlet and outlet connection flanges, etc.

　　Fully automatic filters overcome many shortcomings of traditional filter products, such as small pollutant capacity, easy blockage of pollutants, disassembly and cleaning of components, and inability to monitor the filter status. It has the functions of filtering raw water, automatic cleaning, and discharging the filter element. In addition, the system continuously supplies water during the cleaning and discharge process, and can highly automatically monitor the working status of the filter. It covers various filtration accuracy requirements from 10 microns to 3000 microns.

　　A fully automatic filter is a precision device that directly intercepts impurities, floating objects, and particles. Using a filter screen in the liquid, it simultaneously reduces water turbidity and dirt, ensuring the normal operation and service life of subsequent equipment. It has the characteristic of automatic drainage.

　　Self-cleaning filtration technology is a new type of filtration technology developed in the late 1970s. Its main advantage is that it can be self-cleaned by water pressure, and filtration does not stop during cleaning. Compared with traditional filters, it has the following characteristics: high degree of automation; low pressure loss; no need for manual removal of filter residue. Self-cleaning filters are suitable for separation and filtration in industrial, agricultural, municipal, and seawater desalination processes.

　　 Fully automatic filter Manufacturer: Types of self-cleaning filters

　　There are many types of self-cleaning filters, including brush-type self-cleaning filters, suction-type self-cleaning filters, and backwash-type self-cleaning filters. Different self-cleaning filters have different characteristics and functions. Brush-type self-cleaning filters mainly use a motor to drive a brush to clean the filter element, and then rinse it with clean water.

　　Suction-type self-cleaning filters use the pressure difference of the filter for cleaning. After the wastewater is sucked in, the drain valve will automatically open, and then the next filtration process will continue. In backwash self-cleaning filters, the waste liquid is first filtered through the filter element, and the filtered impurities accumulate around the filter element. When the sensor covered reaches a certain pressure, the washing device will pump water to start the automatic washing process.

　　Among the three types of self-cleaning filters, the backwash filter has the best washing effect and cleans the filter element thoroughly. Next is suction self-cleaning, and brush self-cleaning has the poorest effect. Brush-type self-cleaning filters have poor filter element cleaning effects, complex operation, and affect the efficiency of waste liquid filtration.

　　Thanks to self-cleaning filters, the efficiency of wastewater treatment in industrial production is constantly improving. At the same time, the treated water continues to be recycled, improving resource utilization. Self-cleaning is a great contributor to water source restoration.

　　That's all for today's introduction to fully automatic filter manufacturers. Thank you for watching, and see you next time.